Instrument Calibration Services in Washington

Home 9 Complete Performance Solutions 9 Measurement 9 Calibration

NIST Traceable Calibration From Our Knoxville, TN Laboratory

Our state-of-the-art ISO 17025 accredited calibration laboratory is located in Knoxville, Tennessee, and provides NIST traceable instrument calibration services for clients in Washington and across the country — either in our lab or on your project site. McHale’s Mobile Calibration Lab makes it easy to bring instrument calibration services directly to Washington-based power plants and project sites, minimizing downtime and interruption to daily operations.

What is NIST Traceable Calibration?

NIST traceable instrument calibration means each calibration can be traced, through an unbroken chain of comparisons, back to national measurement standards maintained by the National Institute of Standards and Technology. For power plant clients, this traceability is what makes calibration certificates defensible in contractual acceptance testing and regulatory audits.

Ready for NIST Traceable Instrument Calibration?

Whether in our Knoxville lab or on-site with our Mobile Calibration Lab, McHale delivers ISO 17025 accredited, NIST traceable results for Washington clients and beyond.

View Instrument Rental

FAQ

What is the turnaround time for calibration services?

McHale offers swift, efficient calibration services with a turnaround time tailored to each client’s needs, minimizing downtime.

Are McHale's calibration services compliant with industry standards?

Yes. McHale’s calibration laboratory is ISO 17025 accredited and adheres to stringent industry standards, ensuring NIST traceable instrument calibration at the highest level of accuracy and compliance.

What is the process for calibrating an instrument at McHale?

The process begins with a thorough assessment of the instrument’s condition, followed by precise calibration using state-of-the-art equipment, and concludes with a detailed report certifying that the instrument meets required standards.

Can McHale calibrate instruments for clients in Washington?

Yes. While McHale’s ISO 17025 accredited lab is located in Knoxville, TN, the company’s Mobile Calibration Lab and corporate headquarters in Redmond, WA support instrument calibration services for Washington-based clients on-site.

What types of instruments does McHale calibrate?

McHale calibrates RF/microwave, electrical, thermodynamic, dimensional, and wind tunnel instruments, along with additional capabilities such as torque wrenches, balances, durometers, and gas analyzers.

Available Calibration Services

RF / Microwave

Spectrum Analyzer Calibration
Attenuation
PM Modulation
AM Modulation
FM Modulation
Pulse Generation
Harmonic Distortion
RF Power Measure
RF Power Source
RF Power Sensors

Electrical

DC Voltage (Source & Measure)
DC Current (Source & Measure)
Resistance (Source & Measure)
AC Voltage (Source & Measure)
AC Voltage Harmonics
AC Current (Source & Measure)
Capacitance – Source
DC Power
AC Power
Electrical Simulation of Thermocouples (Type B, C, E, J, K, L, N, R, S, T, U)
Electrical Simulation of RTDs
Multimeters
Oscilloscopes
AC/DC Power Supply
Universal Counters
Signal/Waveform Generators
Thermometer/Thermocouple Readouts
Process Calibrators

Thermodynamic

RTD’s
Thermocouples
Thermometers
Temperature (ovens, dry block calibrators, environmental conditions, coolers, etc.)
Humidity Sensors
Pressure Measuring Instruments (Transmitters, Digital/Analog Pressure
Gages, Transducers)
Pressure Modules
Pressure Calibrators

Dimensional

Indicators
Calipers
Micrometers (OD)
Micrometers (ID)
Thickness Gage (Thickness Micrometer)
Depth Gage
Height Gage
Optical Comparator (linearity only)
ULM (length only)
Thread & Plug Gages
Pin Gages

Wind Tunnel

EPA Method 2 Pitot Probes
EPA Method 5 Pitot Probes
Anenometer Calibration
Multi-ported Pitot Probe Calibration

Additional Capabilities

Torque Wrenches
Compression Testers
Balances/Benchtop Scales
Durometers
Calibrate Gas Analyzers
Gas Detector
Gas Monitoring
Flow Computation Verification

Project Samples

CONTACT OUR SUPPORT GROUP
TO HELP GET YOU STARTED ON HOW WE CAN HELP YOU.

Back to measurement Services

Request More Info



Telephone Number

+1-865-588-2654



Email Address

sales@mchale.com

}

Hours of Operation

Monday – Friday
8:30 AM – 7:30 PM (ET)



Corporate Office - Redmond, WA

8561 154th Avenue NE, Suite 210
Redmond, WA 98052

FAX: +1-425-991-8480

Monday – Friday
7:30 AM – 4:30 PM (PT)



Knoxville, TN

4700 Coster Road
Knoxville, TN 37912

FAX: +1-865-934-4779

Monday – Friday
8:30 AM – 5:30 PM (ET)