EVENTS & CONFERENCES
RE+ Conference in Anaheim
We are thrilled to announce that Wilson Davis & Karsten Kopperstad will be attending RE+ 2024, the premier conference for renewable energy and clean technology. This year’s event, taking place from September 9th through the 12th at the Anaheim...
NCSL International & CPEM Workshop & Symposium
This year, Joseph McHale and Jessica Drinnon were on-hand at the 2024 NCSLI Conference.
CTI Annual Conference 2024
Shawn Goedeke will be presenting the McHale paper “Characterization of Elliptical Pitot Tubes for Water Flow Measurements “ by Dr. Thomas Keith Kirkpatrick, Karsten Kopperstad, Joseph McHale, P.E., and Shawn Goedeke at the 2024 Cooling...
NEWS & Announcements
McHale Announces Global Strategic Alliance with Air Hygiene Inc.
We are very excited to announce that Air Hygiene Inc. (AHI) and McHale & Associates, Inc. (McHale) have entered into a global strategic alliance, leveraging services from AHI’s industry leading stack testing services with McHale’s world-class...
ISO/IEC 17025 Re-Accreditation
McHale & Associates, Inc. is proud to announce its ISO/IEC 17025 reaccreditation with zero (0) nonconformances and additions to our scope. If you would like to learn more, we invite you to check out our Measurements & Calibrations Services...
Navigating Changes to the ICAP Manual
Per the new ICAP Manual (Dec 2018), participants will be required to report an SCR change of status as defined in Section 2.19 of the NYISO Services Tariff per Section 4.3.3.5. McHale & Associates, Inc. can assist with: Updating your correction...
TECH PUB LIBRARY & Services
Overcoming the Challenges of Owning and Maintaining Legacy Instruments
by Jessica Drinnon Whether the instrument has been in service for many years or you just managed to purchase a gently used or refurbished instrument, considerable complications arise when you are notified that the manufacturer or calibration...
Characterization of Elliptical Pitot Tube for Water Flow Measurements
ABSTRACT In 2018, CTI switched from simplex pitot tubes to an elliptical style pitot tubes for water flow measurements. This change was made to reduce the impact of change in Reynolds number on the calibration coefficient of the pitot tube. In...
A Real-Time Output-Loss Method for Monitoring Heat Rate for Coal-Fired Power Plants
ABSTRACT This paper describes a real-time performance monitoring method based on PTC 4-2013 for determining instantaneous heat rate for coal-fired power plants. The calculation protocol uses a modified output-loss approach applied to a control...
SOCIAL CHANNELS